Our systems have detected that you appear to be viewing this site from United States.
We are geared up to offer you a far better service from our USA site.

You can choose to Continue to USA site or Stay on UK site.

0 items
£0.00
Excluding Delivery
01245 322331 Shut
0 items
£0.00
Excluding Delivery

Yamaha TRX 850

When using the abba Superbike Stand or Sky Lift on the Yamaha TRX850, it is common that the gear linkage arm passes across the swing arm pivot bolt head (where the abba Superbike stand and Sky lift connect) As per the picture below (see arrow). Depending on the riders gear lever position it is possible that access is not restricted.

If the linkage arm does pass across the face of the pivot it is a simple case of undoing the small bolt at either the foot peg or gear box end (which ever you find most convenient) to enable our stand or lift to be fitted. Once the stand/Lift has been used you can simply re fit and tighten the small bolt and the bike will be back to its normal mode.

Tip: Draw a small line in marker pen across the pivot shaft & arm, this will ensure you can easily put the arm back in the same position when re-fitting.

If you require any further information on the this please do not hesitate to contact us.